Updating dark panel advice on dating someone with duaghter

To give solid wood paneling a new look, either lightly sand and paint the wood or remove the boards and replace with drywall.

If the paneling is knotty pine, be sure to use a stain blocking, oil or shellac based primer to help prevent the resin in the wood from bleeding through the paint.

Despite the above efforts, you run the risk that some of the color of the wood will bleed through and the paint may even flake off over time.

Mind you, we're not talking about a lot of flaking.

The darker woods can also make a room look smaller and unattractive.

In older homes, this paneling was nailed to 1.5 x 96 inch fur strips or to 2 x 4s.

Then, use a drywall primer and apply two coats of paint.

Use a hammer and flat pry bar to take off any quarter round, baseboards, crown molding, chair rail, or door and window casings.If you want to do away with the wood paneling and don't have concerns about insulating the space then you have three options: Option 1- Sand, Prime and Paint It This is the low cost option and takes little labor.It assumes that you can live with the paneling, but just hate the color.And if your wondering whether it pays to remove the paneling, the answer is no.You can use 1/4 inch dry wall since you just need a thin covering.

Leave a Reply